City, World

Navigation

Admin

Pinterest

 

 

MGHPG-0100-LX

 

Super High Frequency + Vacuum (SHFV) Kiln drying

  Incredibly ergonomic drying chamber, with unrivaled stability and great performance. It provides uniform clamping on the boards, six hydraulic contours. New MGHPG-0100-LX ™ (Series HED-X) is a highly compact, reliable and powerful microwave vacuum chamber for drying wood, with excellent distribution and power density, ensures excellent quality dry timber output. Stability when working with any timber both soft and hard wood. Automatic feeding into the camera and precision electronic controls ensures even distribution of the waves, as well as the maximum tree dehydration speed to the set parameters. Controlled acceleration and deceleration feed microwave energy reduces the damage done when submitting the waves and peaks at a pressure, which increases the efficiency of the cell. Especially proven in the production of wooden wall products for residential construction.camera design consists of a cylinder housing with integrated waveguides for supplying power to the ultra-high frequency generated by a magnetron oscillator and taps condensate by vacuum compressor. The design allows you to improve the quality of the output product, process performance, reducing the time indicators.

 Sale of drying chambers for drying wood quality. Microwave vacuum drying chamber MGHPG-0100-LX (Series HED) produced in Japan. Microwave vacuum drying chamber with short cycle time and higher than the quality of convective and vacuum technologies. Designed for dehydration as a large-sized timber, and for drying of veneer, boards, and softwood. Especially established itself for the production of wooden wall products for residential construction. The design of the chamber consists of a cylinder housing with integrated waveguides for supplying power over a high frequency generated by the magnetron oscillator and the taps for the condensate by means of vacuum compressor. The design allows you to improve the quality of the output product, process performance, reducing the time indicators.

Sale of drying chambers for drying wood quality.  Microwave vacuum drying chamber (Series HED) MGHPG-0060-LX produced in Japan.

made-in-japan-logo-300x294

112 000 USD

Description of work:

 Application of microwave dewatering timber is very promising. Microwaves cause rapid heating in the forest-timber, accompanied by excessive growth in domestic steam pressure.There is a simultaneous diffusion of vapor molecules and its movement through the capillary pores of the wood and the system. The process of removing moisture becomes more intense.

 Dryer Microwave camera works autonomously. Operating voltage - 380 volts. Air cooled magnetron method by modular units. The feed air is heated to the drying temperature used for output of water vapor from the chamber. Heating is required to improve the ability of air to absorb moisture and prevent the wood cool air streams. This arrangement ensures removal of substantially all moisture (about 90 percent) in the liquid form than the amount necessary to reduce drying energy.

 Ultrahigh frequency field generates a uniform effect on the timber, heating it with an intensity proportional to the amount of moisture contained therein. The process of withdrawal of moisture depends on the structure of the timber itself and its internal pressure. In the case of vacuum, the boiling point is directly related to the pressure value.

mghpg-0100-lx (1)

 

 

 

 

 

 

 

 

.